Avaya 4600 Series 제품 정보 - 페이지 2
{카테고리_이름} Avaya 4600 Series에 대한 제품 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya 4600 Series 2 페이지. Infrared dialing
Avaya 4600 Series에 대해서도 마찬가지입니다: 설치 및 안전 지침 (11 페이지), 연결 (14 페이지), 안전 지침 (11 페이지), 매뉴얼 (4 페이지)
페이지 인쇄
Note: The use of PoE and local power simultaneously is not supported and will prevent the adapter from
Product Information
working properly, nor is it intended to serve as a fail-over option. The power cable must be removed from the
Gigabit Ethernet Adapter to allow for use of PoE.
Powering the Phone
*Only some 56/4620SWs are Class 3 – they can be distinguished from Class 2 56/4620SWs by the presence of 2 holes on the microphone
cover, which is located on the side of the lower right corner of the phone. The Class 2 56/4620SWs will have only 1 hole. Both the Class 2 and
Class 3 variants require the use of a local power supply.
**Class 0 devices may require use of the local power supply, depending on their power rating.
Management and Ethernet-Switch parameters
Included Parts and Separate Accessories
Items included with the 4600 Gigabit Adapter
Quantity
Items Offered for Sale Separately
When not using an IEEE Standard 802.3af compliant switch or when using a Class 3 phone, it will be necessary
to purchase local power accessories. This will include the Avaya 1151C1/C2 power supply, A/C power cord,
and the 4600 Gigabit Adapter Power Cord to connect the 1151C1/C2 power supply and 4600 Gigabit Ethernet
Adapter. If the phone is already connected to an 1151B type power supply, only the 4600 Gigabit Adapter
Power Cord is required.
Description
1151C1/C2 Power Supply
6 Foot Gigabit Adapter Power Cable
(4600 & 5600 phones only)
US A/C plug
EU A/C plug
Warranty and Support
© 2006 Avaya Inc.
All Rights Reserved. Avaya and the Avaya Logo are trademarks of Avaya Inc. and may be registered in certain jurisdictions.
All trademarks identified by the ®, SM or TM are registered trademarks, service marks or trademarks, respectively, of Avaya
Inc. All other trademarks are the property of their respective owners. Patent Pending.
If connected only to a Power over Ethernet Switch, the adapter will power Class 0**,1, and 2* phones.
•
If connected to an external power supply, the adapter will power Class 0, 1, 2, or 3 phones.
•
Phone Model
56/4602SW
56/4602SW+
56/4610SW
4620
56/4620SW*
56/4621SW
4622SW
4625SW
4630SW
The adapter is "plug and play," requiring no management or special configuration and setup
•
The adapter will auto-detect speed and duplex settings.
•
The adapter it will transfer all critical Ethernet parameter (802.1x, LLDP, VLAN 802.1p/q,BDPU etc) from
•
PC/Phone to uplink and vice-versa.
Description
1
Gigabit Ethernet Adapter For 4600 & 5600 IP
Phones
1
Installation & Safety Instructions
1
CAT6 Ethernet Cord (6 feet)
The adapter will be fully supported by Avaya, including the standard 1 year manufacturer's warranty and
•
3 years of support after an End of Sale announcement.
Phone Power Class
Class 2
Class 3
Some*
Some
Material code
Description
700356447/ 700356454
UK A/C plug
700416993
India A/C plug
Argentina A/C plug
405362641
Australia/NZ A/C plug
407786623
Japan A/C plug
Classes Powerable
Power Source
Class 0**,1, 2*
PoE
External
Material code
700416985
Included
700420847
Material code
407786599
407790591
408161453
407786631
700405681
Class 3
Updated 12/4/2006