Avaya 4612 빠른 참조 설정 - 페이지 14

{카테고리_이름} Avaya 4612에 대한 빠른 참조 설정을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya 4612 15 페이지. Infrared dialing
Avaya 4612에 대해서도 마찬가지입니다: 사양 (5 페이지), 매뉴얼 (4 페이지), 빠른 참조 설정 (13 페이지)

페이지 인쇄

4. After you have attached the stand to the 4612/4624 IP telephone, use the screw provided to

tighten the stand onto the back of the telephone set.

5. Plug the foot-long CAT 5 line cord into the primary Ethernet line interface jack (identified by an

icon on the left that looks like a modular wall jack).

6. Place the other end of the telephone's line cord through the round hole in the middle of the

telephone stand, and snake it out through the rectangular opening in the center of the stand.

7. Plug the line cord into the wall jack.

8. Place the 4612/4624 IP telephone against the wall so that the screwheads on the mounting

plate enter the holes in the stand. Then pull the telephone down so that the screwheads slide

into the cutout channels.