KitchenAid KEMS379BWH00 설치 지침 매뉴얼 - 페이지 4

{카테고리_이름} KitchenAid KEMS379BWH00에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid KEMS379BWH00 17 페이지. 27" (68.6 cm) and 30" (76.2 cm) electric built-in microwave/oven combination

페이지 인쇄

Ifcodes permit and a separate ground w ire isused, i tis

recommended

thataqualified electrical installer determine that

theground p ath andwire gauge areinaccordance

withlocal

codes.

Check w ithaqualified electrical installer ifyouarenotsure the

oven isproperly grounded.

This oven must b econnected toagrounded metal, permanent

wiring system.

Besure thattheelectrical connection andwire size areadequate

andinconformance

withtheNational Electrical Code, ANSI/

NFPA 7 0-latest edition orCSA Standards C22.1-94, Canadian

Electrical Code, Part 1 andC22.2 No. O -M91-1atest

edition, and

alllocal c odes a ndordinances.

Acopy oftheabove c ode standards canbeobtained from:

National Fire Protection Association

1 Batterymarch

Park

Quincy, MA02169-7471

CSA International

8501 East P leasant Valley R oad

Cleveland, OH 44131-5575

Electrical

Connection

To properly install your oven, you must determine the type of

electrical connection you will be using and follow the instructions

provided for it here.

•

Oven must be connected to the proper electrical voltage,

amperage, and frequency as specified on the model/serial

number rating plate. See the following illustration.

•

Do not cut the conduit. The length of conduit provided is for

serviceability of the oven.

•

A UL listed or CSA approved conduit connector must be

provided.

•

If the house has aluminum wiring follow the procedure below:

1. Connect a section of solid copper wire to the ends of the

flexible conduit leads.

2. Connect the aluminum wiring to the added section of

copper wire using special connectors

and/or tools

designed and UL listed for joining copper to aluminum.

Follow the electrical connector manufacturer's

recommended

procedure. Aluminum/copper

connection must conform with

local codes and industry accepted wiring practices.

For power requirements for models WOC54EC7A, WOC54ECOA,

WOC95ECOA and MMW9730A, refer to the following table.

Voltage

Microwave Oven

and Microwave

Oven with Single

Thermal Oven

Convection Oven

240 VAC

5490W

5520W

208 VAC

4590W

4620W

240 VAC

30.4 A

30.5 A

208 VAC

28.4 A

28.6 A

For power requirements for models KEMS379B and KEMS309B,

refer to the following table.

Voltage

Microwave Oven

and Microwave

Oven with Single

Thermal Oven

Convection Oven

240 VAC

6230 W

6260 W

208 VAC

5239 W

5262 W

240 VAC

36.0 A

35.1 A

208 VAC

32.8 A

32.9 A

For power requirements for model KEHU309B, refer to the

following table.

Voltage

Microwave Oven and

Microwave Oven with Single

Convection Oven

240 VAC

7560 W

208 VAC

6246 W

240 VAC

40.5 A

208 VAC

37.7 A

A. Model/serial number plate

Models rated from 7.3 to 9.6 kW at 240 volts (5.4 to 7.4 kW

at 208 volts) require a separate 40-amp circuit. Models rated

at 4.8 kW and below at 240 volts (3.6 kW and below at

208 volts) require a separate 20-amp circuit.

Model KEHU309B requires a separate 50-amp circuit.

A circuit breaker is recommended.

Connect directly to the fused disconnect (or circuit breaker

box) through flexible, armored or nonmetallic sheathed,

copper cable (with grounding wire). See "Make Electrical

Connection"

section.

Flexible conduit from the oven should be connected directly

to the junction box.