Lexmark C792 Family 관리자 매뉴얼 - 페이지 11

{카테고리_이름} Lexmark C792 Family에 대한 관리자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark C792 Family 20 페이지. Color laser printers
Lexmark C792 Family에 대해서도 마찬가지입니다: 관리자 매뉴얼 (12 페이지), 연결 매뉴얼 (7 페이지), 릴리스 노트 (4 페이지), 정보 매뉴얼 (1 페이지), 관리자 매뉴얼 (13 페이지), 유지 관리 매뉴얼 (12 페이지), 매뉴얼 (11 페이지), 빠른 참조 (11 페이지), 설정 시트 (4 페이지), 종이 매뉴얼 (3 페이지), 인쇄 매뉴얼 (3 페이지), 보충 설명서 (2 페이지), 인쇄 결함 매뉴얼 (2 페이지), 설정 시트 (2 페이지), 데이터시트 (8 페이지), 데이터시트 (8 페이지)

페이지 인쇄
Lexmark C792 Family 관리자 매뉴얼
Updating the network license
Using the Embedded Web Server
1
Click Solutions.
2
Under Installed Solutions, click the appropriate application link.
3
Click License > Update License.
4
Select Network.
5
Click Update License.
Using MarkVision Professional
1
In MarkVision Professional, select the device where the application is installed.
2
Click Settings > Embedded Solutions > Solutions Management.
3
Under the appropriate application, click Update License.
4
In the Update License window, select Use a network license server.
5
Click Update License.

Configuring Eco-Settings using the Embedded Web Server

Configuring energy- and paper-saving options

1
Access the application configuration settings from the Embedded Web Server or MarkVision Professional.
2
Adjust the following settings as necessary:
•
Eco Mode—Choose Off, Energy, Energy/Paper, or Paper.
Note: If your printer model supports duplex printing, then you will be able to print on both sides of the paper.
Choosing Energy/Paper will automatically set 2-Sided Printing and Sleep Mode to default values. Additional
changes made to these settings through the Embedded Web Server will be ignored.
•
Standby Mode—Type the number of minutes (1–240) the printer waits before it enters Standby Mode.
•
Sleep Mode or Power Saver—Type the number of minutes (1–240) the printer waits before it enters Sleep
Mode or Power Saver mode.
•
Screen Brightness—Type a screen brightness percentage (20–100).
•
2-Sided Printing—Choose 1-Sided, 2-Sided Long Edge, or 2-Sided Short Edge.
•
Darkness or Toner Darkness—Choose a toner darkness value (1–5).
•
Quiet Mode—Select this check box to reduce the amount of noise produced by the printer.
Note: When this option is selected, printer engine motors do not start until a print job is ready to print. You
may notice a short delay before the first page is printed, as well as a reduction in processing speed.
•
Lock UI—Select this check box to prevent users from changing Eco-Settings from the printer control panel.
3
Do one of the following:
Configuring the application
11