Avaya INDEX 4602 설치 매뉴얼 - 페이지 5

{카테고리_이름} Avaya INDEX 4602에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya INDEX 4602 16 페이지. Index 4602 ip telephone
Avaya INDEX 4602에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지)

페이지 인쇄

Installation Procedure

Installation Requirements

To install a 4602 IP Telephone onto INDeX, the following items are required:

• Power Socket: A switched 110-240V AC, 50-60Hz, 250-500mA supply

socket is required for each 4602 IP telephone.

• LAN Socket: A 10/100Mbps RJ45 Ethernet LAN connection point is required

for each IP telephone.

• Category 5 Cabling All LAN cables and LAN cable infrastructure used with

4602 IP Telephones must be Category 5 cabling.

• LAN Cables: An RJ45 LAN cable is supplied with the 4602 IP Telephone for

connection to the Power Unit. This cable is fitted with an emc choke and

must be used as the connection between the Power Module and the 4602 IP

Telephone. You will also need an additional RJ45 (not supplied) LAN cable

for connection from the power unit to the customer LAN.

• 1151A1/B1 Power Unit: The A1 variant does not have an internal battery

and the B1 variant does. Neither unit is supplied with the 4602 and must be

purchased separately. Both unit supply power via the LAN cable to the 4602

IP telephone. The Power Unit can be replaced with a alternative LAN power

supply provided that the supply conforms to IEEE 802.3af.

• Voice Compression Module: The IPNC must be fitted with a Voice

Compression Module. The size of the module will limit the number of

simultaneous VoIP calls.

• DHCP Server: The IPNC can perform this role unless another DHCP server

already exists.

• TFTP Server: The PC running the IPNC Manager application can perform

this role. The TFTP server is only required during 4602 IP telephone

installation and maintenance.

• IPNC Manager PC: A PC running Manager is required for IPNC

configuration changes.

• IP Telephone Software: The software for IP telephone installation is

supplied on the INDeX Administration CD and is part of the IPNC Manager

suite.

• Licence Key: The 4602 IP telephones do not need a licence key to be

entered on the system.

Dynamic/Static Addressing

The 4602 IP Telephone can be configured on the LAN using either dynamic or

static addressing. Dynamic addressing is recommended. The procedures for

both are detailed in the following paragraphs.

4602 IP Telephone User PC Connection

The Power Unit has one Line input from the LAN and a Phone output to the

4602 IP Telephone as follows:

1151B1 Power Unit

PHONE

RJ45 Socket

for connection to

4602 IP Telephone

The PC's network configuration does not need to be altered from that which it

previously used for direct connection to the LAN.

INDeX 4602 IP Telephone Installation Manual

38DHB0002UKCQ – Issue 2 (11/06/2003)

All manuals and user guides at all-guides.com

IPNC Setup - Page 5

Socket for connection to mains

power supply at rear

LINE

RJ45 Socket

for connection to LAN

Installation Procedure - Page 5

IPNC Setup