Avaya INDEX 4602 설치 매뉴얼 - 페이지 9

{카테고리_이름} Avaya INDEX 4602에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya INDEX 4602 16 페이지. Index 4602 ip telephone
Avaya INDEX 4602에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지)

페이지 인쇄
Avaya INDEX 4602 설치 매뉴얼
Installation Procedure
3. Enter the IP address for the gatekeeper followed by the # button.
The following message is displayed:
CallsSvPort=nnnn
New=_
where "nnnnn" is the value of the Management Complex (call
server/gatekeeper) transport layer port number, a value between 0 and
65535.
4. Enter the appropriate value for the port number followed by the # button.
The following message is displayed:
Router=nnn.nnn.nnn.nnn
New=_
where "nnn.nnn.nnn.nnn" is the value of the Gateway/router IP address.
5. Enter the IP address of the Gateway/router followed by the # button.
The following message is displayed:
Mask=nnn.nnn.nnn.nnn
New=_
where "nnn.nnn.nnn.nnn" is the value of the IP netmask.
6. Enter the IP netmask followed by the # button.
The following message is displayed:
FileSv=nnn.nnn.nnn.nnn
New=_
where "nnn.nnn.nnn.nnn" is the value of the TFTP server IP address.
7. Enter the IP address of the TFTP server followed by the # button.
One of the following texts is displayed left-justified at the top of the display,
depending on the current status of 802.1Q:
0=off #=OK
INDeX 4602 IP Telephone Installation Manual
38DHB0002UKCQ – Issue 2 (11/06/2003)
All manuals and user guides at all-guides.com
If 802.1Q is off:
If 802.1Q is on:
IPNC Setup - Page 9
802.1Q=off
1=on #=OK
802.1Q=on
Installation Procedure - Page 9
IPNC Setup