Gardena 1434 사용 설명서 - 페이지 7

{카테고리_이름} Gardena 1434에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena 1434 14 페이지. Garden pump

페이지 인쇄

Problem

Pump runs, but the suction

action doesn't take place

Pump motor runs, but

delivery capacity or pressure

suddenly decreases

Pump motor doesn't start

or suddenly stops

In the event of other faults please contact GARDENA Service.

Repairs should only be carried out by GARDENA service centres or dealers

authorised by GARDENA.

7. After Operation

Wintering / Storage :

Disposal :

(in accordance with

RL 2002 / 96 / EC)

Probable cause

Air cannot escape, since

delivery side is closed

or remaining water is in the

pressure hose.

The waiting time wasn't

observed.

Suction filter or backflow preventer v Clean the filter or the back-

in the suction hose clogged.

Too high suction height.

In case of any other difficulties concerning the suction action,

use GARDENA Suction Hoses with Backflow Preventer (see

point 8. Accessories) and fill in the liquid to be pumped over the

filler cap

before operation.

Suction filter at the suction

hose is sucked free.

Suction filter or backflow

preventer clogged.

Leaks at suction side.

Turbine clogged.

No power.

Thermal overload switch

has cut out the pump due

to overheating / overloading.

Electric failure.

You should empty your Garden Pump

before the first frost sets in.

1. Open the water drain screw

The Garden Pump drains.

2. Store your Garden Pump so that

it is protected from frost.

The product must not be added to normal household waste. It

must be disposed of in line with local environmental regulations.

v Important : Make sure that the unit is disposed of via your

municipal recycling collection centre.

Remedy

v Open all possible shut-off

devices (e.g. spray nozzle)

in the pressure line, or drain

the pressure hose or dis-

connect it during the suction

action.

v Switch on the pump and

wait max. 7 min.

flow preventer.

v Reduce suction height.

v Reduce flow rate on the

delivery side with a control

valve, e.g. GARDENA

art. no. (2)977.

v Clean filter or back-flow

preventer.

v Eliminate leak.

v Loosen the turbine.

v Check fuses and electric

connections.

v Take care of cooling /

ventilation.

v Send the pump to one of our

GARDENA Service Centres.