Avaya IP Office 4600 Series 설치 지침 매뉴얼 - 페이지 5

{카테고리_이름} Avaya IP Office 4600 Series에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya IP Office 4600 Series 8 페이지.

페이지 인쇄

DHCP Installation

DHCP Installation Preparation

4600 Series IP Telephone Installation

IP Office

This installation process uses the IP Office Control Unit as a DHCP Server

and H323 Gatekeeper to assign IP and telephony settings to the 4600

Series IP telephone. It also assumes that the Manager application is used

as the TFTP server during installation. This is the simplest method of

installation.

1. Voice Compression Module

The IP Office Control Unit must be fitted with a Voice Compression

Module (VCM).

a. Using an asynchronous terminal program such as HyperTerminal,

connect to the DTE port of the Control Unit (refer to the Manager

Application Manual for full details).

b. Enter AT, the response OK indicates correct connection.

c. Reboot the Control Unit. Within the terminal program you will see

the progress of the reboot. The line "Voice Compression PCB

detected" indicates the presence of a VCM. The next lines indicate

whether it is a 5, 10, 15 or 20 port VCM.

2. Control Unit Settings

Using the Manager Application, open the configuration and select the

System form. Check the following:

a. System Name:

In the System tab ensure that a Name for the Control Unit has been

entered.

b. TFTP Server IP Address:

In the LAN1 tab, enter the IP address of the Manager PC as the

TFTP Server IP Address.

c. Gatekeeper Settings:

In the Gatekeeper tab, ensure that Gatekeeper Enabled and Auto-

create Extn Enable are both selected.

d. If you have made any changes, upload the new configuration to the

Control Unit.

e. Within Manager, select File | Preferences and ensure that the

address is 255.255.255.255, otherwise TFTP will not work.

3. IP Phone Software

Ensure that the correct software files are present in the Manager

directory. The files required are:

•

46xxxupgrade.scr

•

Bbla0_11.bin

•

def06r01_1.bin

•

def24r01_1.bin

4. Manager and TFTPLog

Leave Manager running. It is also useful to have Manager's TFTP Log

visible (select View | TFTPLog). This will display the progress of file

requests.

40DHB0002UKCJ - Issue 5 (08/03/2002)

Page 5