Lexmark CS510 Series 매뉴얼 - 페이지 17

{카테고리_이름} Lexmark CS510 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark CS510 Series 19 페이지. Color laser printer
Lexmark CS510 Series에 대해서도 마찬가지입니다: 기술 노트 (3 페이지), 설정 시트 (2 페이지), 색 품질 매뉴얼 (6 페이지), 빠른 참조 매뉴얼 (15 페이지), 메뉴 맵 (3 페이지), 인쇄 매뉴얼 (3 페이지), 이동 매뉴얼 (2 페이지), 사양 (2 페이지), 빠른 매뉴얼 (2 페이지), 사양 (2 페이지), 브로셔 및 사양 (2 페이지), 서비스 매뉴얼 (18 페이지)

페이지 인쇄
Lexmark CS510 Series 매뉴얼
Action
Replace the imaging kit, and then resend the print job.
Is the print density uneven?

Vertical voids appear on prints

Leading edge
Trailing edge
Action
Step 1
a
Check if your software program is using a correct fill pattern.
b
Resend the print job.
Do vertical voids appear on prints?
Step 2
a
From the Paper Menu on the printer control panel, check the paper type
and paper weight.
b
Resend the print job.
Do vertical voids appear on prints?
Step 3
Check if you are using a recommended type of paper.
a
Load paper source with a recommended type of paper.
b
Resend the print job.
Do vertical voids appear on prints?
Step 4
a
Remove, and then reinstall the imaging kit.
Warning—Potential Damage: Do not expose the imaging kit to direct light
for more than 10 minutes. Extended exposure to light may cause print
quality problems.
Warning—Potential Damage: Do not touch the underside of the imaging
kit. This could damage the imaging kit.
b
Resend the print job.
Do vertical voids appear on prints?
Print quality guide
Page 17 of 18
Yes
No
Contact
customer
The problem is solved.
support.
Yes
No
Go to step 2.
The problem is solved.
Go to step 3.
The problem is solved.
Go to step 4.
The problem is solved.
Go to step 5.
The problem is solved.