Lexmark CS510 Series 매뉴얼 - 페이지 4

{카테고리_이름} Lexmark CS510 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark CS510 Series 19 페이지. Color laser printer
Lexmark CS510 Series에 대해서도 마찬가지입니다: 기술 노트 (3 페이지), 설정 시트 (2 페이지), 색 품질 매뉴얼 (6 페이지), 빠른 참조 매뉴얼 (15 페이지), 메뉴 맵 (3 페이지), 인쇄 매뉴얼 (3 페이지), 이동 매뉴얼 (2 페이지), 사양 (2 페이지), 빠른 매뉴얼 (2 페이지), 사양 (2 페이지), 브로셔 및 사양 (2 페이지), 서비스 매뉴얼 (18 페이지)

페이지 인쇄
Lexmark CS510 Series 매뉴얼
Action
Step 3
a
Remove, and then reinstall the imaging kit.
Warning—Potential Damage: Do not expose the imaging kit to direct light
for more than 10 minutes. Extended exposure to light may cause print
quality problems.
Warning—Potential Damage: Do not touch the underside of the imaging
kit. This could damage the imaging kit.
b
Resend the print job.
Do horizontal voids appear on prints?
Step 4
Replace the imaging kit, and then resend the print job.
Do horizontal voids appear on prints?

Incorrect margins on prints

A B C D
A B C D
A B C D
Action
Step 1
a
Move the width and length guides in the tray to the correct positions for the
paper size loaded.
b
Resend the print job.
Are the margins correct?
Step 2
From the printer control panel, set the paper size in the Paper menu to match
the paper loaded in the tray.
Does the paper size match the paper loaded in the tray?
Print quality guide
Page 4 of 18
Yes
No
Go to step 4.
The problem is solved.
Contact
customer
The problem is solved.
support.
Yes
No
The problem is solved.
Go to step 2.
Go to step 3.
Do one or more of the
following:
•
•
Specify the paper size
from the tray settings
to match the paper
loaded in the tray.
Change the paper
loaded in the tray to
match the paper size
specified in the tray
settings.