Lexmark CS632 빠른 참조 - 페이지 3

{카테고리_이름} Lexmark CS632에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark CS632 11 페이지.
Lexmark CS632에 대해서도 마찬가지입니다: 빠른 참조 (12 페이지)

Adjust the guides to match the size of the paper that you are

Note: Use the indicators on the bottom of the tray to position

the guides.

Flex, fan, and align the paper edges before loading.

Load the paper stack with the printable side faceup.

For one ‑ sided printing, load letterhead faceup with the

•

header toward the front of the tray.

For two ‑ sided printing, load letterhead facedown with the

•

header toward the back of the tray.

•

Do not slide paper into the tray.

•

Make sure that the stack height is below the maximum

paper ﬁll indicator. Overﬁlling may cause paper jams.

Insert the tray.

If necessary, set the paper size and type to match the paper

loaded in the tray.

Loading the manual feeder

Adjust the edge guides to match the width of the paper that

you are loading.

Note: Make sure that the guides ﬁt snugly against the paper,

but not too tight as to cause the paper to buckle.