Gardena 7868 사용 설명서 - 페이지 3
{카테고리_이름} Gardena 7868에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena 7868 6 페이지. Submersible pump for pond filter or stream
GARDENA
Submersible Pump for Pond Filter or Stream
FSP 5500 / FSP 10000 / FSP 15000
Welcome to GARDENA aquamotion ...
Please read these operating instructions carefully and observe
the notes given.
Use the instructions to familiarise yourself with the equipment,
the operating controls, their correct use, and the notes on safety.
For safety reasons, children under 16 as well as persons not
A
familiar with these operating instructions should not use this pump.
Keep these operating instructions in a safe place.
The Applications Range of Your Pump
Intended purpose
GARDENA Submersible Pumps for Pond Filter or Stream have
been designed for private use. They are not designed for operating
watering tools and systems. The pumps may be used indoors as
well as outdoors.
Attention
GARDENA Submersible Pumps for Pond Filter or Stream
A
have not been designed for constant use in the industrial sector.
Corrosive, easily combustible, aggressive or explosive sub-
stances (e.g. petrol, petroleum, nitro thinner) as well as salt-
water or food / drinking water must not be pumped.
A
For Your Safety
Operating the Pump
The pump should be operated via a residual current device
with a residual current rating of ≤ 30 mA (DIN VDE 0100 -702
and 0100 -738). The pump must be placed on solid, even
ground. Please ask your electrician for his advice.
Mains power cables
Mains power cables should not have a smaller cross-section
than a rubber sheathed cable of the designation H07 RNF.
Extension cables must meet the requirements of DIN VDE 0620.
For Austria
In Austria power cables should correspond to ÖVE-EM 42,
T 2 (2000) /1979 § 22 according to § 2022.1. According to this
standard pumps used in swimming pools and ponds should
only be operated via an isolating transformer. Please contact
your electrician.
For Switzerland
In Switzerland mobile appliances which are used outdoors,
must be connected via a residual-current device.
Visual check
Before operating the pump, look to see if there is any damage
of the pump (esp. regarding power cable and plug). A damaged
pump must not be used. In case of damage, please have the
G
9