Gardena 7887 사용 설명서 - 페이지 4

{카테고리_이름} Gardena 7887에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena 7887 10 페이지. Underwater filter with fountain pump set
Gardena 7887에 대해서도 마찬가지입니다: 사용 설명서 (11 페이지)

페이지 인쇄

4. Initial Operation

Commissioning the Pond Filte r :

5. Maintenance

Cleaning the Filter :

A Commissioning the Pond Filter and Fountain :

1. Place the Pond Filter and Fountain on a firm base so that the

filter housing

water).

2. Plug mains plug into an AC power socket.

Warning: Pump will start immediately.

3. Adjust the water flow with the regulating

valves

correct for the fountain / gargoyle.

4. Water Bell, Fleur-de-Lis and Water Jet :

screw the fountain insert into the nozzle

tube until the fountain achieves the

desired shape.

Note : The ball joint

compensate for uneven ground.

B Commissioning the Pond Filter and stepped nipple :

1. Place the Pond Filter and stepped nipple on a firm base so that

the filter housing

water).

2. Plug mains plug into an AC power socket.

Warning: Pump will start immediately.

Warning ! Electric shock !

V Disconnect the pump from the mains before working on it.

Do not use any hard objects or powerful detergents for cleaning

the set!

1. Take the Pond Filter out of the water and unscrew the nozzle

tube

2. Release the catches

3. Remove the pump

4. Remove filter gravel

the filter surrounds

5. Wash out the filter housing

filter surrounds

6. Place the biological surface filter

it under running water).

7. Reassemble the Pond Filter in the reverse order. Be sure to

route the cable in its guides

is fully covered with water (max. 2 m under

so that the flow rate is

can be used to

is fully covered with water (max. 2 m under

/ stepped nipple

and take out the filter housing

from the filter block

and biological surface filter

under running water.

, filter block

, gravel

in clean water (do not wash

and both

and