KitchenAid KCIP 1010/I 사용 설명서 지침 - 페이지 10

{카테고리_이름} KitchenAid KCIP 1010/I에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid KCIP 1010/I 20 페이지.
KitchenAid KCIP 1010/I에 대해서도 마찬가지입니다: (프랑스어) 마누엘 (20 페이지)

페이지 인쇄

Installation

Fig. 7

• Hook the frame to the 2 screws on the ceiling

and fit securely with another 2 screws (front

and back). TIGHTEN ALL THE SCREWS

WELL.

Fig. 8

• Chimney size: the flue comes in a standard

length and can be cut to size.

Note: The height of the flue should be the

same as the frame extension (see the

mathematical formula in Fig. 3)

• Insert the flue in the frame, check that the

welded side is turned to the back (the opposite

side from where the hood control panel will be

when installation is complete). Fit with 2

screws.

Fig. 9

• Hook the motor unit onto the frame on 4

screws previously screwed onto the unit.

Warning! Pass the electrical cable through the

motor unit so that it does not get damaged and

so that it is possible to connect to the electrical

connection box.

Note: the side with the electrical connection

box corresponds with the side (FRONT) where

the control panel will be once the hood has

been installed.

• Securely attach with 2 screws and tighten all 6

screws.

• Connect the power cable to the connection box

and close the box again.

• Connect the extraction vent pipe to the union

ring on the unit.