KitchenAid KCIP 1210/I 사용 설명서 지침 - 페이지 9

{카테고리_이름} KitchenAid KCIP 1210/I에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid KCIP 1210/I 20 페이지.

Installation

Fig. 5

• Attach the ceiling perforation layout onto the

ceiling (the centre of the layout should

correspond with the centre of the hob and the

sides should be parallel to the sides of the hob –

the side of the layout with the words FRONT

on it corresponds to the side of the control

panel). Prepare the electrical connection.

• Make a hole as shown (4 holes for 4 wall plugs).

Insert the 4 plugs into the holes. Screw in 2

screws into the side holes (right and left),

leaving a space between the screw head and the

ceiling of about 1cm.

These screws will act as a hook for the support

structure.

Fig. 6

• Remove the power cable from the connection

• Connect up the electricity on the ceiling within

• Vented mode only: Install a suitable extraction

vented

mode

Vented mode only

box on the motor unit.

the tolerance limits indicated on the template.

vent pipe (with a diameter of 150mm) that is

long enough to reach the connection ring on the

motor unit, when installed.

Use the mathematical formula in the diagram to

do this.