Avaya J139 사용 설명서 - 페이지 6
{카테고리_이름} Avaya J139에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya J139 7 페이지.
Avaya J139에 대해서도 마찬가지입니다: 빠른 참조 (4 페이지), 빠른 참조 (6 페이지), 빠른 참조 (6 페이지), 빠른 매뉴얼 (6 페이지), 사용자 설명서 (10 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (7 페이지), 빠른 참조 (3 페이지)
페이지 인쇄
RECENTS / CALL HISTORY
(Continued)
CALL SETTINGS
J179/J139 TELEPHONE INSTRUCTIONS
To Clear the Call History Menu
1. Press Recents or press Main Menu > Applications >Recents.
2. Press Delete (All).
3. Press Recent (All Calls Screen).
4. Select one of the following when the phone prompts for confirmation:
•
Delete: To delete "all call records" from the call history.
•
Cancel: To cancel and return to the previous menu.
To Adjust the Brightness of a Phone Screen.
1. Press Main Menu >Settings >Display.
2. Select Brightness.
3. Use the Left and Right Arrow keys to increase or decrease the brightness. Press Save or Back.
To Set a Personalized Ring Tone
1. Press Main Menu >Settings >Audio.
2. Use the Down Arrow key to scroll to Personalized Ringing and press Select.
3. Scroll to Primary (or Bridged Call Appearance, Call Pickup or Team Key) and press Select.
4. Use the Up and Down Arrows to review a ring type and press Play.
5. Press Select to choose the required ring tone. Press Save.
To Change the Background Image
1. Press Main Menu >Settings >Display >Background.
2. Scroll down to the new image.
3. (Optional) Press Preview to preview the image, and then press Dismiss.
4. Press Select to choose the image. Press Save.
Turning Error Tones "On" and "Off"
1. Press Main Menu >Settings >Audio.
2. Use the Down Arrow key to go to the Error Tones screen.
3. Press Toggle to turn error tones "on" or "off." Press Save.
To Customize a Phone Key/Button (Label or Move a Button)
1. Press Main Menu >Settings >Phone.
2. Use the Down Arrow key to select Phone Keys Customization.
3. Press Customize Key.
4. Use the Navigation keys to select the line key/button.
5.
To relabel a button, press the Relabel soft key and type the name of the label. Press the OK button.
OR
5.
To move a button, press the Move soft key. Use the Navigation Arrows to move the selected line key.
◆
If the new location is empty, press Select.
◆
If the new location is already assigned a key, press Swap.
To Label an Add-On Module Key/Button
1. Press the Edit button on the bottom of the module.
2. Press the LED button of the item you wish to relabel.
3. Remove the old information and type in the new label using the multi-tap method pressing each key
multiple times to display the proper alpha character needed.
4. Press the green checkmark.
5. Continue to press the associated LED buttons until all desired labels are changed.
6. Press the Phone button or Back key to exit.
Page 6
©
CPCS J179/J139 SIP Telephone Instructions Document CM8.1 / 11-10-20