Gardena FP 4000 E 사용 설명서 - 페이지 5
{카테고리_이름} Gardena FP 4000 E에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena FP 4000 E 13 페이지. Fountain pump set gardena
페이지 인쇄Side outlet :
C
D
5. Maintenance
Clean water feature insert
and nozzle pipe :
Clean filter housing :
Clean the filter of the pond
edge controller:
12
Additional consumers (e.g. gargoyles) can be connected to the
B
side outlet
be adjusted via the regulator
Note : The ball joint
that it is vertical.
B
Warning ! Electric shock !
V Disconnect the pump from the mains before working on it.
Do not use any hard objects or powerful detergents for cleaning
the set!
1. Unscrew nozzle pipe.
2. Unscrew water feature insert and remove from nozzle pipe.
3. Clean nozzle pipe and water feature insert in clean water.
1. Take water feature pump out of the water.
6
2. Unlock snap fastenings
3. Clean filter housing
5
4. Hook the halves of the filter housing into each other and close.
Do not use any hard objects or powerful detergents for cleaning
7
the set!
Light soiling :
v Clean the filter surface of the pond edge controller under
water.
Heavy soiling :
1. Disconnect the pond edge controller from the hose underwater
to prevent air from being drawn in.
2. Take pond edge controller out of the water, open and clean.
3. Reconnect the pond edge controller to the hose under water.
(1/2", 3/4" and 1"nipple) The quantity of water can
C
.
D
can be used to align the water feature so
6
and open up the filter housing
5
with a jet of water.
5
.