Gardena FP 7500 E 사용 설명서 - 페이지 4
{카테고리_이름} Gardena FP 7500 E에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena FP 7500 E 14 페이지. Submersible pump / dirty water pump
Gardena FP 7500 E에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지), 사용 설명서 (14 페이지)
페이지 인쇄
Instructions for
submersible pump 7000
When you purchase your pump the swivel
feet are set to the flat suction position
(1 mm).
v For normal operation, turn the feet 180°
to 5 mm.
The pump is lifted 5 mm.
v Clear the outlet line before use.
Thermal protection switch
The pump is automatically switched off on
overheating by the built-in thermal motor
protector. After having cooled down, the
motor automatically switches on again (see
7. Trouble Shooting).
3. Initial Operation
Hose diameter
a
b
7
Hose connection
7
of universal fitting
Hose connection
Automatic deaerating valve
4
If the pump is half submersed, water may
come out of the ventilation holes
This is not a defect of your pump, but serves
to deaerate the pump.
13 mm ( ¹⁄₂ " )
16 mm ( ⁵⁄₈ " )
19 mm ( ³⁄₄ " )
Cut off topmost
a
nipple at
.
The following connection kits are required for 13 mm to
19 mm connections:
13 mm ( ¹⁄₂ " ):
GARDENA Pump Connection Set, Art. No. 1750
16 mm ( ⁵⁄₈ " ):
GARDENA Tap Connector, Art. No. (2)902,
and GARDENA Standard Hose Connector,
Art. No. (2)916
19 mm ( ³⁄₄ " ):
GARDENA Pump Connection Set, Art. No. 1752
Best results in delivery capacity are achieved when using 38 mm
(1 ¹⁄₂ " ) hoses.
The automatic
deaerating valve
eliminates any
air pockets in the
pump.
25 mm (1 " )
Do not cut off
Cut off top two
any nipples.
4
.
38 mm (1 ¹⁄₂ " )
b
nipples at
.
13