Gardena RP 300 사용 설명서 - 페이지 5

{카테고리_이름} Gardena RP 300에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena RP 300 18 페이지. Indoor fountain pump / water light jet pump 9 v
Gardena RP 300에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지), 사용 설명서 (10 페이지)

The temperature of the liquid used must not
be below 4 °C or above 35 °C.
Sand and other abrasive substances in the
liquid cause increased wear and reduce the
output of the pump.

3. Initial Operation

Starting up the pump :
1
2
RP 240
RP 300
RP 420
RP 600
3
18
Please observe the local noise prevention
regulations.
1. RP 600 : Insert the fountain socket
2. Install the pump at ground level so that the filter housing
is standing in water to at least half its height (with pumps
RP 240 / RP 300 / RP 420 make sure that the sides of the
foam filter under the pump are not blocked).
3. Plug mains plug into an AC power socket.
Warning : Pump will start immediately.
4. Use the flow control
fountain pump.
1
and nozzle tube
3
to set the desired water flow for the
2
.