Lexmark E 330 기술 지침 - 페이지 4

{카테고리_이름} Lexmark E 330에 대한 기술 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark E 330 8 페이지. How to reset the photoconductor page count through the printer's configuration menu
Lexmark E 330에 대해서도 마찬가지입니다: 사양 (2 페이지), 설정 (2 페이지), 빠른 참조 (2 페이지), 안전 정보 (2 페이지), 브로셔 (2 페이지), 사양 (4 페이지), 재설정 방법 (2 페이지)

페이지 인쇄

Step 17

Install the keyed end of the

developer roller axle into the

toner hopper end plate and

lower the developer roller into

place. (See Photo 19)

Photo 19

Step 18

Install the contact bushing onto

the developer roller axle. Rotate

the bushing clock-wise to lock

the bushing into place.

(See Photo 20)

Photo 20

E-mail: [email protected]

Photo 21

Photo 22

Photo 23

Photo 24

Photo 25

Lexmark E232/330/332 Technical Instructions

Step 19

Slide the developer roller contact onto

the end of the hopper.

(See Photo 21)

Step 20

Rotate the hopper 180° and install the

developer roller drive gear onto the axle

of the roller. Place the "E" clip onto the axle

to hold the drive gear in place.

(See Photo 22)

Step 21

Install the idler gear onto the end of the

cartridge. (See Photo 23)

Step 22

Install the cartridge drive gear onto the

end of the cartridge.

(See Photo 24)

Step 23

Place the doctor bar tension spring onto

the top of the doctor bar so the arrow is

facing away from the hopper. Place the

white tabs onto the doctor blade next to

each end of the tension spring.

(See Photo 25)

Website: