Gardena WP 900 사용 설명서 - 페이지 4

{카테고리_이름} Gardena WP 900에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena WP 900 7 페이지. Fountain pump

페이지 인쇄

Remote control

Example for application:

For operating water jets from the comfort of your patio or

your living room.

Products:

GARDENA Remote Control Set

GARDENA Remote Control Socket

Pond aeration

Example for application:

To aerate the pond.

Product :

GARDENA Pond Aerator

Filling the filter tank

Zeolith fulfils the following functions:

with zeolith

Filters the water (

Bonds with excessive nutrients and causes their decomposition

by bacteria (

Helps to keep the pond clean and maintain the biological

balance.

Provides stability for the pump.

GARDENA Zeolith, 1 l

GARDENA Zeolith, 5 l

Note :

To ensure the zeolith functions correctly, we recommend you

replace or clean it every 6 months (e.g. in salt water).

Information

Always unplug the pump first before working on it.

Before assembling system extensions first unscrew the pre-

assembled cascade and if necessary also the telescopic tube

of the pump and then screw one of the water jets on again

(

the ball-and-socket joint ensures that the water jet is

vertical).

Follow the Safety and Assembly Information attached to the

operating instructions.

Operation

Installing the pump

1. Remove the pump from the filter basket and screw the regulator

supplied onto the second opening of the pump up to the limit

stop (

replace the pump in the filter basket.

2. Put the pump on a stable base to ensure that the upper edge

of the filter tank is completely immersed in water.

Pay attention to

Please note the maximum submersion depth (see "Technical Data").

minimum water depth

Art. No. 7874

Art. No. 7875

Art. No. 7936

protection for the pump).

Ion exchange and the bonding of e.g. nitrate).

Art. No. 7914

Art. No. 7915

max. delivery capacity on the vertical outlet). Then

Starting the pump

Connect the power cable to a 230 V AC socket.

Caution! Pump will start running immediately!

Avoid dry operation

Avoid dry operation of the pump as dry running will produce

undesirable heat and destroy the pump.

Horizontal or

Loosen the regulator by turning it anti-clockwise until you

second outlet

achieve the desired water flow from the vertical pipe of the

fountain / water feature. The narrow, light grey ring makes it

easy to screw on another drawing point (e. g. for a stream).

You may connect other terminals to the second outlet.

For example, a separately installed water jet may be operated

via the GARDENA Fountain / Light Bracket, Art. No. 7886.

If necessary fix the light jet base with two screws.

Information:

This significantly reduces the volume of the vertical water jet.

If the max. delivery capacity of the second outlet is to be used

then the vertical outlet should be closed with the end cap sup-

plied.

Example:

Hose pipe connection with the GARDENA light jet base

We recommend the use of a 3 /4" (19 mm) GARDENA pond

hose pipe, Art. No. 7895, connected to with the GARDENA

"Profi" Maxi-Flow-System with Tap Connector (Art. No. 2801

and 2802) and the GARDENA "Profi" Maxi-Flow-System Hose

connectors (Art. No. 2817).

Care instructions

Cleaning the filter tank

Filter tank and pump should be free from dirt particles!

How to clean :

Disconnect the plug!

Remove the pump from the water.

If necessary remove the gravel.

Clean the pump and the filter using a water jet.

If there are deposits of dirt inside the pump then dismantle the

casing (

fittings with water.

Information: Do not use any hard objects or strong detergents!

Blocked feed impeller

If the feed impeller becomes blocked, the pump and the filter

should be cleaned (see above).

see „Dismantling") and carefully clean the interior