Lexmark E260 Series 사용 설명서 - 페이지 12

{카테고리_이름} Lexmark E260 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark E260 Series 12 페이지. Toner cartridge
Lexmark E260 Series에 대해서도 마찬가지입니다: 브로셔 및 사양 (4 페이지), 빠른 참조 (10 페이지), 설정 시트 (2 페이지), 유지 관리 매뉴얼 (11 페이지), 서비스 매뉴얼 (5 페이지), 유지 관리 매뉴얼 (11 페이지)

페이지 인쇄

LEXMARK E260 • 360 • 460 • X264 • 363 • 364 MFP TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS

23. If the felt cover is available, wrap the cartridge as shown.

This cover helps protect the developer roller from damage.

Aftermarket covers are in development.

PRINTING TEST PAGES E360/E460/X363/X364

1. Press the "Key" button on the control panel

2. Press the "Down Arrow" until UTILITIES MENU appears on the display

3. Press the "Select" button

4. Press the "Down Arrow" until the PRINT MENUS, PRINT STATS, or PRINT FONTS appears on the display.

REPETITIVE DEFECT CHART

38.8mm

PCR

48.3mm

Developer Roller

52.4mm

Transfer Roller

80.0mm

Upper fuser Belt

98.3mm

OPC Drum

PRINTER ERROR CODES

Most error codes are in plain English so we will not repeat them here, but a few are numeric.

There are quite a few of the "XX" numbers under each category. We have just listed the basics here.

30.XX Cartridge Errors:

There is a mechanical issue with the cartridge or the chip is bad

31.XX Defective Cartridge Errors:

Either the cartridge is missing, the chip is bad/or missing or the chip reader in the printer is defective.

200.XX Paper Jam

920.XX 921.XX, 922.XX All various fuser errors

UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]