Avaya one-X 9611G 사용자 설명서 - 페이지 12

{카테고리_이름} Avaya one-X 9611G에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya one-X 9611G 20 페이지. Ip deskphones h.323
Avaya one-X 9611G에 대해서도 마찬가지입니다: 사양 (2 페이지), 빠른 참조 매뉴얼 (4 페이지), 빠른 참조 매뉴얼 (2 페이지), 매뉴얼 (2 페이지), 빠른 참조 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (7 페이지), 빠른 참조 (3 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 (3 페이지), 빠른 참조 (3 페이지), 빠른 참조 (3 페이지), 사용자 설명서 (17 페이지), 빠른 참조 (2 페이지), 빠른 참조 (7 페이지), 빠른 시작 매뉴얼 (2 페이지), 사용 설명서 (9 페이지), 빠른 시작 매뉴얼 (6 페이지), 빠른 참조 (2 페이지), 빠른 참조 (5 페이지)

Avaya one-X 9611G 사용자 설명서
Introduction to the 9608 and 9611G deskphones
Icon
Administrative messages
Your administrator can send important messages such as notification of an early office shut
down due to inclement weather or information about an imminent service interruption to your
deskphone.
These types of messages can take any of the following forms:
• a text message streaming across the top display line, accompanied by an audible alert
• an audible alert broadcast through the Speaker or the headset if that device is active
• an interrupt screen notifying you that you are receiving an audio alert
While receiving an audible alert, you can switch between the Speaker, handset, and headset,
can terminate the pushed audio content by going on-hook, and can adjust the volume, as you
normally would during a call.
12
Avaya one-X
®
Deskphone H.323 9608 and 9611G User Guide
Description
until the volume turns off. To reinstate volume, press +
on the Volume button.
Team icon indicating this team member is available.
Team icon indicating this team member is busy on a call
and not available.
Team icon indicating this team member is not on a call
but is forwarding incoming calls.
Team icon indicating this team member is busy on a call
and is forwarding incoming calls.
Your administrator may place this icon on one of your
softkeys as an energy-saving measure. Pressing this
softkey turns the display backlight off. When the
backlight is off, any activity on your telephone turns it
back on.
Indicates that your phone is in an "Unnamed
Registration" state, caused by not entering an extension
within 60 seconds of being prompted for one or not
entering a password. In this situation, your phone may
register with its call server but will show only one call
appearance, no features, and will allow only outgoing
calls. To switch from the unnamed registration state,
login with a valid extension and password.
April 2013