Gardena 9811 사용 설명서 - 페이지 6

{카테고리_이름} Gardena 9811에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena 9811 16 페이지. Turbotrimmer
Gardena 9811에 대해서도 마찬가지입니다: 운영자 매뉴얼 (9 페이지)

Setting the trimmer to

body height:

Adjusting the plant guard:

Working position 3:

The upright must be in the uppermost position in working

position 3.

1. Turn plant guard

it engages.

2. Press the foot pedal

uppermost position.

3. Press the button

until it engages.

4. With the impeller, move the trimmer along the lawn edge.

CAUTION! The trimmer may only be used provided that the

trimmer head is engaged at an angle of 0° or 90°.

Setting the shaft length:

v Loosen the clamping sleeve

desired shaft length and re-tighten the threaded collar

The clamping sleeve

prevent the shaft from being moved.

Setting the additional handle:

v Pull the lock

belonging to the additional handle

additional handle

If the trimmer is correctly set to the body height, the posture

is upright and the trimmer head in working position 1 is tilted

forwards slightly.

v Hold the trimmer by the handle

such a manner that the trimmer head is tilted forwards slightly.

Working position

v Turn plant guard

until it locks into place.

through 90° into the Parking position until

and move the upright into the

and rotate the trimmer head from 0° to 90°

, extend the handle

must be fastened firmly enough to

to the desired incline and release the lock

and additional handle

Parking position

through 90° into the required position

to the

, set the