Broadata Link Bridge LBC-HDMI-R-WP 사용자 설명서 - 페이지 13

{카테고리_이름} Broadata Link Bridge LBC-HDMI-R-WP에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Broadata Link Bridge LBC-HDMI-R-WP 20 페이지. Hdmi wall plate hdbaset transmission system

페이지 인쇄

LBC-HDMI-T/R-WP User's Manual

Link Bridge

HDMI Wall Plate HDBaseT Transmission System

4.0 MAINTENANCE AND TROUBLESHOOTING

4.1 Maintenance

There is no operator maintenance other then keeping the units

clean. However, observe the following light indicators to make

sure that the unit is working properly:

4.2 Troubleshooting

If the LBC-HDMI-T/R-WP units do not operate properly after

installation, check for possible cable breaks, loose connections,

and incorrect cable connections. If problems persist that may

be fiber related, contact BCI at 1-800-214-0222 for further

assistance.

For electrical problems, perform the following troubleshooting

procedures:

1. If the POWER indicator is OFF, check for the following:

a. The line cord is plugged into the unit and your outlet

has power.

2. If the POWER indicator is ON, but the Link indicator is

OFF, check for the following:

a. Make sure the appropriate cables are being used.

b. Cable and cable connectors are not broken.

c. For each unit, the transmit (TX) cable is connected to

the other unit's receiver (RX).

3. If the POWER indicator and Link indicator are ON, but

the channels are not operating, then:

a. Check to see that the attached user equipment is turned

on.

b. Both ends of the link are connected to the corresponding

equipment and to the same corresponding channel port.

Broadata Technical Support, (800) 214-0222