Gardena 9835 운영자 매뉴얼 - 페이지 4

{카테고리_이름} Gardena 9835에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena 9835 13 페이지. Electric hedge trimmer
Gardena 9835에 대해서도 마찬가지입니다: 운영자 매뉴얼 (9 페이지), 운영자 매뉴얼 (13 페이지), 운영자 매뉴얼 (9 페이지), 운영자 매뉴얼 (9 페이지), 운영자 매뉴얼 (10 페이지)

페이지 인쇄

3) Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the influence of drugs, alcohol or medication.

A moment of inattention while operating power tools

may result in serious personal injury.

b) Use personal protective equipment. Always wear

eye protection. Protective equipment such as dust

mask, nonskid safety shoes, hard hat, or hearing pro

tection used for appropriate conditions will reduce per

sonal injuries.

c) Prevent unintentional starting. Ensure the switch

is in the off-position before connecting to power

source and / or battery pack, picking up or carry-

ing the tool. Carrying power tools with your finger on

the switch or energising power tools that have the

switch on invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tools may

result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewellery or

long hair can be caught in moving parts.

g) If devices are provided for the connection of dust

extraction and collection facilities, ensure these

are connected and properly used. Use of dust col

lection can reduce dustrelated hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application.

The correct power tool will do the job better and safer

at the rate for which it was designed.

b) Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot be con

trolled with the switch is dangerous and must be

repaired.

c) Disconnect the plug from the power source and /

or the battery pack from the power tool before

making any adjustments, changing accessories,

or storing power tools. Such preventive safety

measures reduce the risk of starting the power tool

accidentally.

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the

power tool or these instructions to operate the

power tool. Power tools are dangerous in the hands

of untrained users.

e) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and

any other condition that may affect the power

tool's operation. If damaged, have the power tool

repaired before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to

be performed.

Use of the power tool for operations different from

those intended could result in a hazardous situation.

5) Service

Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Hedge trimmer safety warnings:

• Keep all parts of the body away from the cutter

blade. Do not remove cut material or hold materi-

al to be cut when blades are moving. Make sure

the switch is off when clearing jammed material.

A moment of inattention while operating the hedge

trimmer may result in serious personal injury.

• Carry the hedge trimmer by the handle with the

cutter blade stopped. When transporting or stor-

ing the hedge trimmer always fit the cutting

device cover. Proper handling of the hedge trimmer

will reduce possible personal injury from the cutter

blades.

• Hold the power tool by insulated gripping sur-

faces only, because the cutter blade may contact

hidden wiring or its own cord.

Cutter blades contacting a "live" wire may make

exposed metal parts of the power tool "live" and could

give the operator an electric shock.

• Keep cable away from the cutting area. During

operation the cable may be hidden in shrubs and can

be accidentally cut by the blade.

Additional safety warnings:

Work area safety

Only use the product in the manner and for the functions

described in these instructions.

The operator or user is responsible for accidents or

hazards occurring to other people or their property.

While operation and transport pay special attention to the

hazard for other people.

Risk of stumbling. While operation pay attention to the

cable.

Warning! When wearing hearing protection, and due to

the noise produced by the product, the operator may not

notice persons approaching.

Do not use the product when a thunderstorm is

approaching.

Do not use the product nearby a water.

Electrical safety

DANGER! Cardiac arrest!

This product makes an electromagnetic field while it oper-

ates. This field may under some conditions interfere with

active or passive medical implants. To decrease the risk

of conditions that can possibly injure or kill, we recom-

mend persons with medical implants to speak with their

physician and the medical implant manufacturer before

you operate the product.