Lexmark E360D series 빠른 참조

{카테고리_이름} Lexmark E360D series에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark E360D series 2 페이지. Loading paper
Lexmark E360D series에 대해서도 마찬가지입니다: 설정 및 설치 (2 페이지), 브로셔 및 사양 (4 페이지), 브로셔 및 사양 (4 페이지), 보충 설명서 (5 페이지), 문제 해결 매뉴얼 (8 페이지), (독일어) 보충 설명서 (9 페이지)

Quick Reference

Pull the tray completely out.

Squeeze the width guide tabs on the right guide as shown, and

slide the width guides to the sides of the tray.

Squeeze the length guide tabs together as shown, and slide

the length guide to the correct position for the paper size being

loaded.

Flex the sheets back and forth to loosen them, and then fan

them. Do not fold or crease the paper. Straighten the edges on

a level surface.

Load the paper stack toward the back of the tray as shown with

the recommended print side facedown.

Note: Notice the maximum fill line on the side of the width

guide which indicates the maximum height for loading paper.

Do not try to overload the tray.

Loading paper

Maximum fill line

When loading letterhead, place the top edge of the sheet

toward the front of the tray. Load the letterhead with the

design placed facedown.

Squeeze the width guide tabs on the right guide, and slide the

width guides to lightly touch the side of the stack.

Insert the tray.