Broadata Link Bridge LBC-PSW52 사용자 설명서 - 페이지 7

{카테고리_이름} Broadata Link Bridge LBC-PSW52에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Broadata Link Bridge LBC-PSW52 20 페이지. Presentation scaling switch with 5 inputs and two mirrored outputs

페이지 인쇄

LBC-PSW52 User Manual

Link Bridge

Presentation Scaling Switch

10. Input Control: This input control reserving for direct source

input selection. Connect ground pin (mark as C on panel) with

following pin number for individual source selection.

11. Com Port: Connect with D-Sub 9 pin cable with PC or laptop

for this scaler box controlled by RS-232 commands.

12. Control: This port is the link for WebGUI control; connect to an

active Ethernet link with an RJ45 terminated cable. Use BCI's

IP Discovery program to obtain devices IP address to access

WebGUI Control.

13. Input Sources:

a. PC 1 & PC2: Connect to a PC/Laptop source for video

signal input with D-Sub 15pin cable.

b. Display port: Connect to a PC / Laptop source for video

signal input.

c. HDMI 1 & HDMI2: Connect to HDMI sources such as

Blu-ray/DVD player for both video and audio signal.

14. Output:

a. CAT5e/6/7 Out: Connects with compatible Receiver for video

and/or audio output.

b. HDMI Out: Connect to an HDMI display or AV Receiver for

video and/or audio output.

15. DC 24V: Plug the 24V DC power supply into the unit and connect

the adaptor to an AC outlet.

Broadata Technical Support, (800) 214-0222