Lexmark E360dtn (독일어) 보충 설명서 - 페이지 4
{카테고리_이름} Lexmark E360dtn에 대한 (독일어) 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark E360dtn 9 페이지. Loading paper
Lexmark E360dtn에 대해서도 마찬가지입니다: 보충 설명서 (5 페이지)
3
Grasp the handle, and pull the extension so it flips forward.
4
Guide the extension down gently so the multipurpose feeder
is extended fully and open.
Loading the multipurpose feeder
1
Squeeze the tab located on the right width guide, and move
the guides out fully.
2
Prepare the paper or specialty media for loading.
•
Flex sheets of paper or paper labels back and forth to
loosen them, and then fan them. Do not fold or crease the
paper or labels. Straighten the edges on a level surface.
•
Hold transparencies by the edges, and then fan them.
Straighten the edges on a level surface.
Note: Avoid touching the print side of the transparencies.
Be careful not to scratch them.
4
•
Flex a stack of envelopes back and forth to loosen them,
and then fan them. Straighten the edges on a level surface.
Note: Fanning prevents the edges of envelopes from
sticking together. It also helps them feed properly to
avoid jams. Do not fold or crease envelopes.
3
Load the paper or specialty media.
Notes:
•
Do not force any paper into the multipurpose feeder.
Overfilling may cause jams.
•
Do not exceed the maximum stack height by forcing paper
or specialty media under the stack height limiters which
are located on the guides.