Gardena classicCut special 사용 설명서 - 페이지 4
{카테고리_이름} Gardena classicCut special에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena classicCut special 13 페이지. Turbotrimmer
페이지 인쇄
3. Assembly
Mounting the cover
and plant guard :
4
1
3
4. Operation
Risk of injury !
Connecting the
Turbotrimmer :
8
7
Setting the Turbotrimmer
to the working position :
C
B
12
1. Turn over the Turbotrimmer and
stand it on the rubber buffer of
the handle.
2. Fit the cover
2
head
and guide the cutting
3
filament
in the cover.
3. Secure the cover
two screws
4. Push the plant guard
the cutting head
hear it snap into place.
The plant guard keeps plants you
do not want to trim away from the
cutting filament.
2
Risk of injury if the Turbotrimmer does not switch off when
you release the start button.
V Never bypass the safety devices (by binding the start
button to the handle, for example).
1. Push the extension cable
the cable lock
2. Plug the plug
trimmer into the socket
extension cable.
Working position :
Position the additional handle
so that the cutting head
tilted slightly forward when you
hold the Turbotrimmer in the
working position.
A
1. Unscrew the tightening nut
move the additional handle
to the correct position and tighten
B
the nut
2. Unscrew the adjusting nut
set the additional handle
the correct angle and tighten
the adjusting nut
1
on the cutting
through the opening
1
using the
4
.
5
onto
2
until you
6
into
7
8
on the handle
9
of the Turbo-
0
of the
A
2
is
B
,
A
by hand.
C
,
A
to
C
by hand.
.
9
0
5
7
6
A
2