Broadata LBC-H2CS-T/R-Lite 사용자 설명서 - 페이지 5
{카테고리_이름} Broadata LBC-H2CS-T/R-Lite에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Broadata LBC-H2CS-T/R-Lite 14 페이지. Link bridge hdbaset hdmi 2.0 exteder 4 play
페이지 인쇄LBC-H2CS-T/R-Lite User Manual
Link Bridge
HDBaseT HDMI 2.0 Extender, 4 Play
TM
2.0 OPERATION CONTROLS AND FUNCTIONS
2.1 Transmitter Front and Rear Panels
2
3
1.
LED: Power LED, Status LED, Link LED, HDCP LED
(a) Power LED: This LED light always shine is meant that
works fine.
(b) Signal LED: This LED light is always shine is meant
that video signal works fine.
(c) Link LED: This LED light always shine is meant that
works fine.
2. Latch-locking power jack: Connect to 12V DC power supply
3. RJ45: Plug in a Cat-5/5e/6 cable that needs to be linked to
the receiving unit LBC-H2CS-R-Lite
4. IR Receiver: Infrared 3.5mm socket for plugging in the
extension cable of IR receiver
5. IR Blaster: Infrared 3.5mm socket for plugging in the
extension cable of IR blaster
6. RS-232(terminal block format): The order of RS-232 pin
are TX, RX, GND (from the left side to the right)
7. Dip Switch: for F/W update ([ON] F/W update Mode; [OFF]
Normal Mode)
8. HDMI IN: Connects to a HDMI source with HDMI male-male
cable
6
1
6
4
5
Broadata Technical Support, (800) 214-0222
Front
LBC-H2CS-T-Lite
Rear
8
7