Lexmark E460DN - Taa Govt Compliant 빠른 참조
{카테고리_이름} Lexmark E460DN - Taa Govt Compliant에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark E460DN - Taa Govt Compliant 2 페이지. Information guide
Lexmark E460DN - Taa Govt Compliant에 대해서도 마찬가지입니다: 인쇄 매뉴얼 (10 페이지), 연결 매뉴얼 (5 페이지), 설정 시트 (2 페이지), 정보 매뉴얼 (1 페이지)
페이지 인쇄
Quick Reference
Loading paper
1
Pull the tray completely out.
2
Squeeze the width guide tabs on the right guide as shown, and
slide the width guides to the sides of the tray.
3
Squeeze the length guide tabs together as shown, and slide
the length guide to the correct position for the paper size being
loaded.
4
Flex the sheets back and forth to loosen them, and then fan
them. Do not fold or crease the paper. Straighten the edges on
a level surface.
5
Load the paper stack toward the back of the tray as shown with
the recommended print side facedown.
Note: Notice the maximum fill line on the side of the width
guide which indicates the maximum height for loading paper.
Do not try to overload the tray.
Loading paper
1
1
Maximum fill line
When loading letterhead, place the top edge of the sheet
toward the front of the tray. Load the letterhead with the
design placed facedown.
6
Squeeze the width guide tabs on the right guide, and slide the
width guides to lightly touch the side of the stack.
7
Insert the tray.