Gardena ComfortCut Plus 500/27 사용 설명서 - 페이지 8

{카테고리_이름} Gardena ComfortCut Plus 500/27에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena ComfortCut Plus 500/27 15 페이지. Turbotrimmer
Gardena ComfortCut Plus 500/27에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지), 사용 설명서 (16 페이지), 운영자 매뉴얼 (9 페이지), 사용 설명서 (16 페이지)

페이지 인쇄

Cleaning the trimmer:

Replacing the filament

cassette:

The ventilation slots must always be free of dirt.

v Clean all moving parts after each use, and especially remove

any grass and dirt from the cover

Risk of injury!

v N ever use metallic cutting elements or replacement

parts and accessories not provided by GARDENA.

Only use original GARDENA Filament Cassettes. You can

order Replacement Filament Cassettes from your GARDENA

dealer or directly from the GARDENA Customer Service.

• for Art. 9808 / 9809:

GARDENA Filament Cassette for Turbotrimmers

• for Art. 9811:

GARDENA Filament Cassette for Turbotrimmers

1. Press in cassette cover

time and remove.

2. Remove the filament cassette

3. Remove any dirt.

4. Pull approximately 15 cm of the cutting filament

new filament cassette

5. First thread the cutting filament

6. For Art. 9808 / 9809 only: Thread the cutting filament

the guide pin

7. Insert the filament cassette

holder

8. Fit the cassette cover

so that you hear both locking clips

For Art. 9808 / 9809 only: When fitting the cassette cover

the cutting filament

and must not be trapped.

v If the cassette cover

filament cassette

is completely in the filament cassette holder

on the two catches

through the hole in the plastic ring

into the filament cassette

on the filament cassette holder

must be placed around the guide pin

cannot be touched down, turn the

to and fro, until the filament cassette

and ventilation slots

at the same

out of the

through the metal sleeve

click into place.

Art. 5307

Art. 5309

around