Lexmark E462 인쇄 매뉴얼 - 페이지 9

{카테고리_이름} Lexmark E462에 대한 인쇄 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark E462 10 페이지. Maintenance guide
Lexmark E462에 대해서도 마찬가지입니다: 빠른 참조 (2 페이지), 기술 노트 (3 페이지), 연결 매뉴얼 (5 페이지), 미디어 매뉴얼 (4 페이지), 네트워크 설정 (4 페이지), 소모품 매뉴얼 (2 페이지), 설정 시트 (2 페이지), 정보 매뉴얼 (1 페이지), 유지 관리 매뉴얼 (10 페이지)

Lexmark E462 인쇄 매뉴얼

Setting the Paper Size and Paper Type

When the Paper Size and Paper Type settings are the same for any trays, the trays are automatically linked.
Note: If you load a tray with paper that is the same size as the paper that was previously loaded in the tray, you do not need
to change the Paper Size setting.
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
Paper Menu appears.
3
Press
.
4
Press the up or down arrow button until Paper Size/Type appears, and then press
5
Press the up or down arrow button until the correct tray or feeder appears, and then press
6
Press the left or right arrow button until the correct size appears, and then press
Paper Type appears.
7
Press the left or right arrow button until the correct type appears, and then press
Submitting selection appears, followed by Paper Size/Type.

Printing on specialty media

Specialty media is card stock, transparencies, labels, and envelopes, so it is all media that is not paper.
1
Load specialty media as specified for the tray or multipurpose feeder. See one of these sections for help if needed:
"Loading trays" on page 1
"Using the multipurpose feeder" on page 4
2
From the printer control panel, set the Paper Type and Paper Size according to the specialty media you loaded.
3
From the computer software application, set the paper type, size, and source according to the specialty media you loaded.
Do one of the following:

For Windows users

With a document open, click File  Print.
a
b
Click Properties, Preferences, Options, or Setup.
c
From the Form Source list box, select the source containing the paper you loaded.
d
From the Form Type list box, select the paper type.
e
From the Form Size list box, select the paper size.
f
Click OK, and then click Print.

For Macintosh users

In Mac OS X:
a
Customize the settings as needed in the Page Setup dialog.
1
With a document open, choose File > Page Setup.
2
From the Paper Size pop-up menu, choose a paper size or create a custom size to match the loaded paper.
3
Click OK.
.
Printing guide
Page 9 of 10
.
.
.
.