Gardena EasyCut 9823 사용 설명서 - 페이지 6
{카테고리_이름} Gardena EasyCut 9823에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena EasyCut 9823 16 페이지. Accu turbotrimmer
Gardena EasyCut 9823에 대해서도 마찬가지입니다: 사용 설명서 (18 페이지), 사용 설명서 (17 페이지)
페이지 인쇄
ß
ß
ß
ß
ß
B
L1
L2
L3
W
5. Operation
DANGER!
Setting the working position:
16
Avoid exhaustive discharge:
If the battery is empty, the full discharge protection automatically
switches off the device to prevent the battery from discharging
fully. To prevent the fully charged battery from self-discharging
via the unplugged charger, it should be disconnected from the
charger after charging. If the battery was stored for more than
1 year, it must be fully recharged.
If the battery was fully discharged, the charging indicator lamp
will flash rapidly at the start of charging (twice per second).
If the charging indicator lamp
10 minutes, a fault has occurred (see 8. Troubleshooting).
If the error-LED
on the battery flashes, a fault has occurred
ß
W
(see 8. Troubleshooting). In case of a completely empty battery
it will take approx. 20 minutes until the LEDs on the battery
will indicate charging. But the charging process is indicated by
the flashing LED
on the charger.
9
Battery charging status indicator during operation:
v Press button
on the battery.
ß
B
66 – 99 % charged
L1, L2 and L3 lit.
33 – 65 % charged
L1 and L2 lit.
10 – 32 % charged
L1 lit.
1 – 9 % charged
L1 flashing.
0 % charged
No indicator.
Risk of injury if the Turbotrimmer does not switch off when
you release the start button.
v Never bypass the safety devices or switches (e.g. by tying
the safety lock to the handle).
Risk of injury!
v Remove the battery prior to each adjustment of the
working position, to the shaft length, additional handle
or plant guard!
Working position 1:
Standard trimming
still flashes rapidly after
9
Working position 2:
Trimming beneath
obstacles
9
Working position 3:
Vertical trimming
of overhanging lawn
edges