Gardena EasyCut Li-18/23 R 사용 설명서 - 페이지 5
{카테고리_이름} Gardena EasyCut Li-18/23 R에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena EasyCut Li-18/23 R 17 페이지. Accu turbotrimmer
Gardena EasyCut Li-18/23 R에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지), 사용 설명서 (18 페이지), 운영자 매뉴얼 (11 페이지), 사용 설명서 (17 페이지)
페이지 인쇄
ß
A2
ß
A1
q
4. Initial Operation
Charging the battery:
4
5
5
9
8
16
8. Place the protective cover
9. Turn the protective cover
trimmer head entirely (the two arrows
from each other).
10. Rotate the protective cover
engages.
WARNING!
Overvoltage damages batteries and the battery
charger.
v E nsure the correct mains voltage.
Before using for the first time, the battery must be fully charged.
Charging time (for uncharged battery) see 10. Technical Data.
The lithium-ion battery can be charged in any state of charge,
6
and the charging process can be interrupted at any time without
harming the battery (no memory effect).
1. Depress both locking buttons
the battery holder
2. Plug the plug of the charger cable
3. Plug battery charger
Charging indicator lamp
once per second: Battery is being charged.
Charging indicator lamp
Battery is fully charged.
(For charging time, see 10. Technical Data.)
Battery charging status indicator during charging:
100 % charged
7
66 – 99 % charged
33 – 65 % charged
0 – 32 % charged
Check the charge status regularly while charging.
4. Once completely charged, disconnect the battery
battery charger
charger
8
5. Slide the battery
it audibly engages.
on top of the trimmer head
q
until it can be pushed over the
q
anti-clockwise until it audibly
q
and remove the battery
4
on the handle.
6
into a mains socket.
8
at the charger unit flashes green
9
at the charger unit is lit green:
9
L1, L2 and L3 lit.
L1 and L2 lit, L3 flashing.
L1 lit, L2 flashing.
L1 flashing.
. Disconnect the battery
8
first, then unplug the battery charger
onto the battery holder
5
,
are directly across
ß
ß
A1
A2
5
into the battery
.
7
5
from the
5
from the battery
5
.
8
on the handle until
6
.
3
from