Gardena EHT 410 vario 2594 사용 설명서 - 페이지 5

{카테고리_이름} Gardena EHT 410 vario 2594에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena EHT 410 vario 2594 10 페이지. Electric hedge trimmer

Initial Operation

Two-hand safety switch

Starting the Hedge Trimmer

Stopping the

Hedge Trimmer

Possible working positions

Swivel

handle down

handle up

for cutting

high hedges

low hedges

Cable lock / Extension Cable

Make part of the extension cable into a loop and clip into

the cable lock.

prevents the cables being unplugged by accident.

Then:

Connect the mains and extension cables.

The Hedge Trimmer is fitted with a two-hand safety switch to

prevent the tool being turned on by accident. To start the Hedge

Trimmer, simultaneously press a start button on the guide handle

and turn the turning switch to either the left or right.

Hold the guide handle with one hand and press one of the three

start buttons.

With your other hand, hold the swivel handle and move the switch

to the left or right as far as it will go and hold in this position.

Preferable turning direction : towards you.

the Hedge Trimmer starts moving.

To stop the Hedge Trimmer, simply release one of the start buttons

or the turning switch.

In accordance with safety regulations, an additional safety device

ensures that the blade motion stops within 1 sec.

Swivel

sideways

cutting