Gardena ErgoCut 48-Li 사용 설명서 - 페이지 8

{카테고리_이름} Gardena ErgoCut 48-Li에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena ErgoCut 48-Li 14 페이지. Cordless hedge trimmer

페이지 인쇄

7. Troubleshooting

Fault

Hedge trimmer does not start

Hedge Trimmer does not

start / starts only briefly.

Hedge is not cleanly cut

Charging indicator lamp does

not light up

Charging indicator lamp

flashes for more than

1 hour

The battery can no longer

be charged

In the event of other faults please contact GARDENA Service.

Repairs should only be carried out by GARDENA service centres or dealers

authorised by GARDENA.

8. Accessories

GARDENA

Replacement Battery

Li-Ion 18 V

GARDENA

Quick Battery Charger

GARDENA Maintenance Oil

DANGER ! Risk of physical injury !

Cutting injuries can be caused if the hedge trimmer

does switch on unintentionally.

V Remove the battery before maintenance (see

3. Operation) and slide the protective cover

over the cutter blade.

Possible cause

Battery is flat.

Battery not pushed onto

the handle properly.

Hedge Trimmer overheats.

Blade blunt or damaged.

Battery

not plugged in properly.

A fault has occurred.

Battery is defective.

Only the original GARDENA Replacement Battery 18 V

(Art. 8835 / 8839) may be used. This can be obtained from

your GARDENA dealer or directly from GARDENA Service.

Battery for additional duration or for

replacement 1.6 Ah (approx. 60 Min.) /

2.6 Ah (approx. 100 Min.)

Charging the batteries up to three

times faster.

Extends the life of the blade.

Remedy

v Charge battery (see

3. Initial Operation).

v Push battery onto the handle

and make sure that the

locking buttons snaps in

correctly.

v Let Hedge Trimmer cool for

30 seconds.

v Have blade replaced by

GARDENA-Service.

v Plug in battery charger and

charging cable properly.

v Unplug and reinsert

charging cable. The fault

will be reset.

v Replace the battery

(Art. 8835 / 8839).

Art. 8835 / 8839

Art. 8831

Art. 2366