Gardena HighCut 48 8880 사용 설명서 - 페이지 6
{카테고리_이름} Gardena HighCut 48 8880에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena HighCut 48 8880 13 페이지. Electric hedge trimmer
페이지 인쇄
Working positions :
Rotate cutting unit
through 90° :
4
Tilting the swivel head :
1
The hedge trimmer can be operated in 4 working positions.
Side trimming:
Cutting unit
rotated by 90°
For sideways cutting, the cutting unit can be rotated through 90°.
The cutting unit
handed or left-handed users respectively.
1. Disconnect mains plug.
2. Keep button
3. Turn cutting unit
3
button
3
A safety device prevents the Hedge Trimmer from starting up when
3
the button
For trimming at high and low level, the swivel head
tilted at an angle of 75° to -45° in 15° increments.
1. Unplug the mains plug.
2. Hold down the button
3. Tilt the swivel head
4. Release the button
2
A safety device prevents the hedge trimmer from starting when
the button is depressed or not engaged
angle exceeds -45° (packing position).
Vertical trimming
Horizontal
at high level :
trimming at
Telescopic tube
high level :
extended
Cutting head
tilted by 75°,
telescopic tube
extended
4
can be turned to the right or left for right-
3
pressed.
4
90° in the required direction until the
locks into place.
is pressed or not locked in 0° or 90° position.
1
.
2
in the direction wanted.
1
and allow it to engage.
Trimming at low
level :
Cutting head
extended by
-45°, telescopic
tube extended
2
can be
1
or when the tilting
15