Gardena ProCut 1000 사용 설명서 - 페이지 3

{카테고리_이름} Gardena ProCut 1000에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena ProCut 1000 14 페이지. Turbotrimmer
Gardena ProCut 1000에 대해서도 마찬가지입니다: 사용 설명서 (15 페이지), 사용 설명서 (14 페이지), 사용 설명서 (15 페이지)

페이지 인쇄

Check your Turbotrimmer before each use

v Always visually inspect your Turbotrimmer

before each use.

v Check that the ventilation slots are not

obstructed in any way.

Do not use your Turbotrimmer if the safety

devices (push button, safety cover) and / or

the filament cassette are damaged or

worn.

v Never bypass the safety devices.

v Inspect the area to be cut before you begin

work. Remove any debris (such as stones).

Look out for debris (such as stones) while

you are working.

v If you should come across any debris while

cutting, turn off the Turbotrimmer. Remove

the debris and check the Turbotrimmer for

any damage. If necessary have your Turbo-

trimmer repaired.

Use / responsibility

The Turbotrimmer can cause serious injuries.

Children must be supervised to ensure that

they do not use or play with the trimmer.

v Use the Turbotrimmer only for the purpose

specified in these operating instructions.

You are responsible for the safety in the area

where you are working.

v Ensure that there are no other people

(especially children) or animals within or

near the area where you are working.

v Never operate the machine with damaged

guards or without the guards in place.

Unplug the mains plug after use and check

your Turbotrimmer, especially the filament

cassette, regularly for damage. Have your

Turbotrimmer repaired and / or replace the

filament cassette if necessary.

v Always wear an eye shield or safety

goggles !

v Wear sturdy shoes and long trousers to

protect your legs. Keep your fingers and

feet away from the cutting filament –

above all when starting work.

v Always ensure that you have a secure

foothold whilst working.

v Keep the extension cable away from the

area you are cutting.

Take extra care when walking backwards.

You may stumble !

v Only work in the daylight or when visibility

is good.

Take care against injury from any device fitted

for trimming the filament line length.

After extending new cutter line always return

the machine to its normal operating position

before switching on.

Interrupting work

v Never leave the Turbotrimmer unattended

where you are working.

v If you stop work, unplug the mains plug and

store your Turbotrimmer in a safe place.

v If you stop work in order to move to

another part of the garden, always switch

off the Turbotrimmer, wait until the tool

stops and then unplug the mains plug.

Familiarise yourself with the

surroundings

v Familiarise yourself with the surroundings

and look out for possible dangers which

you may not hear due to machine noise.

v Never use the Turbotrimmer when it is

raining or in damp, wet areas.

v Do not operate your Turbotrimmer directly

next to swimming pools or garden ponds.

Electrical safety

Check the power cord regularly for

damage and signs of wear and tear.

Do not use your Turbotrimmer if the power

cord is damaged.

v If the mains cord or extension cable is

damaged while you are working, unplug

the mains plug immediately.

Do not touch the cable until the mains

plug is switched off.

If the mains cord is damaged, it must be

replaced by a GARDENA service centre

or similarly qualified person.

The socket of the extension cable you are

using must be waterproof.

v Only use extension cables designed for

outdoor use.

v Ask your electrician.

For all portable units that are operated out-

doors we recommend using a residual current

device (RCD) with a tripping current of not

more than 30mA.

In Switzerland the use of a residual-current

device is obligatory.