Avaya 3606 사용자 설명서 - 페이지 7

{카테고리_이름} Avaya 3606에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya 3606 16 페이지.
Avaya 3606에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (1 페이지), 사용자 설명서 (16 페이지)

Basic Call Handling

Place a second call

To place a second call while active on a call:

1. Press the HOLD key to place the current call on hold.

2. Press the LINE key and the digit for the line you want to use.

3. Dial the telephone number you want to call.

To hold the current call, press the HOLD key.

The line you placed on hold flashes.

To retrieve (pick up) a held call, press the LINE key and the digit for the line on

hold.

To hang up an active call, press the END key.

NOTE:

Make sure to press the END key at the end of each call.

1. While active on the call, press the FCN key and the 3 key.

The call is placed on hold, the line number for the call on hold flashes, and

you hear dial tone.

2. Dial the telephone number to which you want to transfer the call.

3. Do one of the following:

To transfer the call without announcing it, press the FCN key and the

3 key, and then press the END key to hang up.

The call is transferred. The display shows "Transfer Complete".

To announce the call before transferring it, wait for the called party to

answer. When the called party answers, announce the call, press

the FCN key and the 3 key, and then press the END key to hang up.

The call is transferred. The display shows "Transfer Complete".

Issue 2 February 2003