Gardena 1198 사용 설명서 - 페이지 7
{카테고리_이름} Gardena 1198에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena 1198 9 페이지. Automatic water distributor
Gardena 1198에 대해서도 마찬가지입니다: 사용 설명서 (11 페이지)
페이지 인쇄
By deactivating the pro-
A
gramme (Bad Weather
Function), it may be possible
that the watering programmes
no longer agree with the respec-
tive water outlets of the Auto-
matic Water Distributor. There-
fore avoid deactivation of the
programmes or re-assemble
respectively the correct se-
quence by turning the dial disc
(after starting operation). Only
for use in combination with
9. Maintenance, care, storage
The Automatic Water Distributor
is maintenance free, only the dirt
filter (4) has to be cleaned from
time to time. Please store the
Automatic Water Distributor in
a frost-resistant place before the
first frost sets in.
EU-Certificate of Conformity
The undersigned
GARDENA Manufacturing GmbH · Hans-Lorenser-Str. 40 · D - 89079 Ulm
hereby certifies that, when leaving our factory, the unit indicated below is in accordance with the harmonised
EU guidelines, EU standards of safety and product specific standards.
This certificate becomes void if the unit is modified without our approval.
Description of the unit :
Automatic Water Distributor
Art. No.:
1198
EU Directives :
Machinery Directive
98 / 37/ EC : 1998
2006 /42 / EC : 2006
Harmonised European Standards :
EN 292 -1
EN 292 - 2
12
the Water Computer 1060 with
"Special Program", activation
of this function is possible
without changing the sequence
of the watering programmes.
Please note the advice given in
the operating instructions of
your tool!
Operate the Automatic
A
Water Distributor in con-
nection with the GARDENA
Moisture Sensor only when
linked up to the Watering
We expressly point out – that
in accordance with product
liability law – we are not liable
for damage caused by our
equipment if it is due to im-
proper repair or if parts have
been exchanged not using our
Original GARDENA parts or
parts approved by us and if the
repairs were not carried out
Year of CE marking :
1994
Ulm, 15.05.2000
Thomas Heinl
Technical Dept. Manager
Computer 1060 with "Special
Program". With tools without
this function, the danger exists
that, the ordering of the pro-
grammes to their specific out-
lets may be altered.
Never press the dial disk
A
during operation.
The individual outlets can
A
be operated one after the
other, i.e. outlet 1, outlet 2 ...
by the GARDENA Technical
Service. The same applies to
supplementary parts and acces-
sories.
Should you have any further
questions, please contact a
GARDENA Service Centre
(address on the rear).
G