Gardena 1825 사용 설명서 - 페이지 6

{카테고리_이름} Gardena 1825에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena 1825 10 페이지. Water timer electronic
Gardena 1825에 대해서도 마찬가지입니다: 사용 설명서 (10 페이지), 사용 설명서 (20 페이지), 사용 설명서 (20 페이지)

페이지 인쇄

1. Putting Your Water Timer into Operation

Setting the Watering Time :

5. Set the watering time on the outer black scale (Run Time

Minutes) using the control knob and confirm your selection

by pressing the OK button (e.g.: 30 minutes).

The program you have selected is now active.

Changing the watering time :

On hot or cooler days you can change the watering time before the

program starts without having to re-enter the time of day, watering

starting time or watering cycle.

1. Select the changed watering time on the outer black scale

(Run Time Minutes) by turning the control knob. (e.g.: 20 min-

utes). The Run Time LED flashes.

2. Confirm the watering time you have selected by pressing the

OK button.

The changed watering time is now active.

Manual watering (ON) :

On especially hot days the programmed watering cycle is some-

times insufficient. You can then turn on your sprinkler or irrigation

system manually.

The program you have set remains unchanged.

v Turn the control knob to ON.

The valve opens for 30 minutes independent of the set pro-

gram.

To activate the set program again, you must reset the watering

time to the time originally set.

Bad-weather function (OFF) :

On rainy days the programmed watering cycle is often unneces-

sary. You can therefore stop the programmed watering cycle

(bad-weather function).

The program you have set remains unchanged.

v Turn the control knob to OFF.

The valve closes and remains closed, independent of the

watering cycle you have set.

To reactivate the set program, you must first reset the watering

time.