Gardena 1830 사용 설명서 - 페이지 9
{카테고리_이름} Gardena 1830에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena 1830 18 페이지. Water timer
페이지 인쇄
1. Setting the watering program on the programming card
2. Insert programming card
3. Press red button briefly.
The green LED flashes for 10 seconds.
4. Remove programming card
keeping it straight (while the green LED flashes).
The green LED goes on for 5 seconds and the program has
been transferred.
8
If the green LED flashes at 10 second intervals, the Watering
Timer has been programmed and the program is active.
Push the timer slide to the actual time of day
(e.g.: 12 o'clock).
Push starting time slide to the starting time required
(e.g.: 6 o'clock).
Push watering time slide to the length of time required.
(e.g.: 15 minutes).
Push cycle slide to the cycle required
(e.g.: 24 hours = every day).
8
in the card slot of the Water Timer.
8
at a constant speed whilst
8
:
9