Gardena 1874 사용 설명서 - 페이지 4

{카테고리_이름} Gardena 1874에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena 1874 17 페이지. Water computer
Gardena 1874에 대해서도 마찬가지입니다: 사용 설명서 (17 페이지), 운영자 매뉴얼 (17 페이지)

페이지 인쇄
Gardena 1874 사용 설명서
Display messages :
E
D
C
5
A
9 8
4
The display level can be changed at any time by pressing the
Menu button. All programme data changed up to this time and
confirmed with the OK button is saved. If data is changed during
programmed irrigation and confirmed with the OK button then
the valve is closed.
Display
5
Weekdays
Mo , Tu , ...
6
Time
D
7
C
am / pm
6
8
Start
7
9
Run Time
0
0
B
8h, 12h, 24h,
2nd, 3rd, 7th
A
Prog
ON
/
OFF
B
Direct sensor
control
C
Sensor 1 / 2
dry / wet
ï
D
Valve
V1 /
ð
Valve V2
E
Battery
If the battery frame is flashing, the valve is no longer opened. A
valve opened by the programme will also close again if the
battery is flat. The battery display is reset when the battery is
changed.
Description
Current weekday
or programmed
S
watering days
.
Current time of day (flashes when in
input mode).
Display for 12-hour clock (e.g. in USA,
Canada).
Watering start time (flashes when in
input mode).
Watering duration (flashes when in
input mode).
Watering cycle (with
Every 8 / 12 / 24 hours; every 2nd / 3rd /
7th day.
Watering programme on (
Watering is automatically controlled
between 20:00 and 06:00 via the Soil
Moisture Sensor.
Dry sensor dry : watering is carried out.
Wet sensor wet : watering is not carried
out.
The arrow indicates the selected valve:
S
- displayed
: the valve is connected
S
- flashing
:
the valve is open
Indicates 5 battery levels :
3 bars :
Battery fully charged
2 bars :
Battery half full
1 bar :
Battery low
0 bar :
Battery almost flat
Frame
is flashing :
Battery flat
activated).
ON
) / off (
OFF
).