Gardena 19031 운영자 매뉴얼 - 페이지 4
{카테고리_이름} Gardena 19031에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena 19031 9 페이지.
7
To connect the Water Control:
8
9
0
To fit anti-theft device
(optional):
q
w
4
CAUTION!
Rechargeable batteries should not be used!
1. Press the tab
2. Remove the battery holder
3. Insert batteries into the battery holder
that the polarity
4. Push the battery holder
5. Close the cover
6
5
ß
P
The Water Control is fitted with a sleeve nut
(33.3 mm) thread. The adaptor supplied
to be connected to taps with a (G 3/4") (26.5 mm) thread.
1. For tap with a G 3/4" (26.5 mm) thread:
Screw adaptor
2. Screw sleeve nut
by hand (do not use pliers).
3. Screw tap connector
To secure your Water Control against theft, you can obtain
the GARDENA Anti-theft device Art. 1815-00.791.00 from
GARDENA Service.
1. Screw clamp
Water Control.
2. Use clamp
It is no longer possible to remove the screw after it has been
screwed in.
(5)
and open the cover
(7)
.
ß
is correct.
P
(7)
back into the battery compartment.
(6)
.
(8)
on to the tap manually (do not use pliers).
(9)
of the Water Control on to the adaptor thread
(10)
on to the Water Control.
(11)
(12)
with screw
firmly to the back of the
(11)
e.g. for fixing a chain.
(6)
.
(7)
. In doing so, ensure
(9)
for taps with (G 1" )
(8)
allows the Water Control