Gardena 3000/4 운영자 매뉴얼 - 페이지 4

{카테고리_이름} Gardena 3000/4에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena 3000/4 10 페이지. Pressure tank unit
Gardena 3000/4에 대해서도 마찬가지입니다: 운영자 매뉴얼 (10 페이지), 사용 설명서 (14 페이지), 사용 설명서 (15 페이지), 사용 설명서 (10 페이지), 사용 설명서 (7 페이지), 운영자 매뉴얼 (9 페이지), 사용 설명서 (13 페이지)

페이지 인쇄

Problem

Possible Cause

Pump runs, but the suction

Too high suction height.

action doesn't take place

In case of any other difficulties concerning the suction action,

use GARDENA Suction Hoses with Backflow Preventer (see point

7. ACCESSORIES) and fill in the liquid to be pumped over the

filler cap

Pump motor runs,

Suction filter at the suction

but delivery capacity

hose is sucked free.

or pressure suddenly

decreases

Suction filter or backflow

preventer clogged.

Leaks at suction side.

Impeller blocked.

Pump motor doesn't start

No power.

or suddenly stops

Circuit breaker has switched

off the motor due to over-

heating / overload.

Electric failure.

Noise development in the

In the case of strong flows (e.g. open hose end, without

hydraulic area

connect ing device), noise may result in the hydraulic part of

the pump. This is harmless and does not lead to damage

of the pump. The noise can be removed by lightly changing

the flow (e.g. light opening/closing of a connecting device).

NOTE: For any other malfunctions please contact the GARDENA service depart-

ment. Repairs must only be done by GARDENA service departments or specialist

dealers approved by GARDENA.

7. ACCESSORIES

GARDENA Suction Hoses

Kink-proof and vacuum-proof, optionally available by the metre

Art. 1720/1721 (19 mm (3/4")- / 25 mm (1")) without connecting

fittings or in fixed length Art. 1411/1418 complete with connect-

ing fittings.

GARDENA Suction Hose

For connection on the suction side.

Fitting

GARDENA Pump

For connection on the delivery side.

Connection Set

GARDENA Suction Filter

To equip suction hoses with backflow

with backflow preventer

preventer sold by the metre.

GARDENA Pump

Recommended for pumping sandy liquids.

Preliminary Filter

GARDENA Electronic

Automatically cuts in and out the pump

Manometric Switch

depending on the current operating

pressure. With dry-running safety. It must

be installed at one of the two outlets.

GARDENA Dry-Running

Prevents the pump from damages in case

Safety

of missing liquid.

The Dry-Running Safety cannot be directly

connected to the pump and must be

mounted with Original GARDENA System

Fittings in the pressure hose.

GARDENA Bore Hole Suction

For vacuum-resistant connection of

Hose

the pump to boreholes or pipe networks.

Length 0.5 m. With 33.3 mm (G1) female

thread at both ends.

8. TECHNICAL DATA

Garden Pump

Unit

Rated Power

Max. delivery capacity

l/h

Max. pressure /

bar / m

max. delivery head

Max. self-priming suction

height

Perm. internal pressure

bar

(delivery side)

Mains voltage /

V (AC) / Hz

Mains frequency

Connection cable

1707-52.960.02.indd 4

Remedy

v Reduce suction height.

before operation.

v Reduce flow rate on the deli-

very side with a control valve,

e. g. GARDENA art. (2)977.

v Clean filter or back-flow

preventer.

v Eliminate leak.

v Release impeller.

v Check fuses and electric

connections.

v Ensure sufficient cooling /

ventilation and clean the

impeller chamber.

v Send the pump to one of our

GARDENA Service Centres.

Art. 1723/1724

Art. 1750/1752

Art. 1726/1727/1728

Art. 1730/1731

Art. 1739

Art. 1741

Art. 1729

Value (Art. 1707)

Value (Art. 1709)

600

800

3,100

3,600

3.6 / 36

4.1 / 41

220 – 240 / 50

1.5; H07RN-F

Garden Pump

Unit

Value (Art. 1707)

Weight

6.5

Sound power level L

measured/guaranteed

76 / 79

dB (A)

Uncertainty k

Measuring process complying with:

2000/14/EG

9. STATEMENT OF WARRANTY

I. Husqvarna's Manufacturer's Warranty

(Australia and New Zealand)

A. General Terms & Conditions

Husqvarna provides a 2 year manufacturer's warranty to the initial

purchaser for each new product produced by Husqvarna that is sold

by an Authorised Husqvarna Supplier in Australia or New Zealand. This

warranty provides such initial purchaser with a guarantee against faulty

workmanship in manufacture and /or defective components for the war-

ranty period from the date of purchase.

The benefits given by this manufacturer's warranty are in addition to other

rights and remedies of the consumer under law in relation to the goods to

which this warranty relates (see Part II and Part III).

B. Making a Claim

If any product supplied by Husqvarna is found to be defective due to faulty

manufacture and /or defective components within the warranty period,

Husqvarna through its Authorised Dealers will repair or replace the product

to the customer at Husqvarna's cost providing;

• Proof of purchase is provided.

• The fault is not caused by misuse, neglect, adjustments and /or

modifications by the consumer.

• The consumer presents the product at an Authorised Dealer's premises.

• Failure has not occurred through normal wear and tear.

• Any costs incurred to obtain warranty consideration or services is the

consumer's responsibility, including shipping and handling, travel

expense, lost time, pickup and delivery.

C. Consumer Responsibilities

Please take reasonable steps to maintain the products as explained in the

maintenance section of the owners/operators manual or handbooks. We

are not responsible if you cause the product to become of unacceptable

quality or if the product is damaged by abnormal use.

II. Additional Statutory Warranties (Australia Only)

Our goods come with guarantees that cannot be excluded under the

Australian consumer law. You are entitled to a replacement or refund for

a major failure and for compensation for any other reasonably foreseeable

loss or damage. You are also entitled to have the goods repaired or

replaced if the goods fail to be of acceptable quality and the failure does

not amount to a major failure.

III. Additional Statutory Warranty (New Zealand Only)

In New Zealand the manufacturer's warranty (see Part I) is in addition

to the rights and remedies provided by the New Zealand Consumer

Guarantees Act.

IV. What Legal Entity Is Providing These Warranties

The herein described warranties (both manufacturers and statutory)

are provided by the following entities:

A. Within Australia this warranty is provided by

Husqvarna Australia Pty Ltd

(ABN 45 115 475 619)

4 Pioneer Ave

Tuggerah NSW 2259

Ph: 1300 804 213

B. Within New Zealand this warranty is provided by

Husqvarna New Zealand Ltd

(Company No. 111861)

51 Aintree Avenue Airport Oaks

Manukau 2022

Ph: 09 920 2410

Value (Art. 1709)

7.0

77 / 81

02.07.20 16:03