Fronius KD Supply 2500 사용 설명서 - 페이지 4

{카테고리_이름} Fronius KD Supply 2500에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fronius KD Supply 2500 16 페이지.
Fronius KD Supply 2500에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)

Fronius KD Supply 2500 사용 설명서

General

Introduction

Thank you for the trust you have placed in our company and congratulations on buying
this high-quality Fronius product. These instructions will help you familiarise yourself with
the product. Reading the instructions carefully will enable you to learn about the many
different features it has to offer. This will allow you to make full use of its advantages.
Please also note the safety rules to ensure greater safety when using the product. Care-
ful handling of the product will repay you with years of safe and reliable operation. These
are essential prerequisites for excellent results.
Explanation of
safety notices
Indicates immediate danger.
Indicates a potentially hazardous situation.
Indicates a situation where damage or injury could occur.
NOTE!
Indicates a risk of flawed results and possible damage to the equipment.

Machine concept

KD Supply 2500
4
DANGER!
If not avoided, death or serious injury will result.
WARNING!
If not avoided, death or serious injury may result.
CAUTION!
If not avoided, minor injury and/or damage to property may result.
The KD Supply 2500 enables the TIG
power sources TT 2500 / 3000 Job and
MW 2500 / 3000 Job to be used with a
cold wire feeder. The built-in switched-
mode power supply supplies the feeder
motor.
The KD Supply 2500 simultaneously func-
tions as an active LocalNet distributor. In
addition to providing an interface to the
cold wire feeder, the KD Supply 2500 also
has an additional LocalNet interface, e.g.
for a remote control unit.