Lexmark Monochrome Laser 연결 매뉴얼 - 페이지 13

{카테고리_이름} Lexmark Monochrome Laser에 대한 연결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark Monochrome Laser 19 페이지. Maintenance guide
Lexmark Monochrome Laser에 대해서도 마찬가지입니다: 사용자 설명서 (6 페이지), 사양 시트 (1 페이지), 보충 설명서 (5 페이지), 용지 걸림 제거 (2 페이지), 용지 걸림 지우기 매뉴얼 (2 페이지), 인쇄 매뉴얼 (17 페이지), 업데이트 (1 페이지), 연결 매뉴얼 (5 페이지), 정보 매뉴얼 (1 페이지), 빠른 참조 (1 페이지), 유지 관리 매뉴얼 (11 페이지), 설치 시트 (1 페이지), 유지 관리 매뉴얼 (10 페이지)

The information in the following table may help you solve print quality problems. If these suggestions still do not

correct the problem, call for service. You may have a printer part that requires adjustment or replacement.

Problem

Print is too light.

ABC

DEF

Toner smears or print

comes off the page.

ABC

DEF

Toner appears on the back

of the printed page.

Toner fog or background

shading appears on the

page.

ABC

DEF

Entire page is white.

Action

• The toner may be low. To utilize the remaining toner, remove the cartridge by gripping the

handles with both hands. With the cartridge arrows pointing downward, shake the print

cartridge back and forth. Reinstall the cartridge and then press

• Change the Toner Darkness setting in the Quality Menu.

• If you are printing on an uneven print surface, change the Paper Weight and Paper Texture

settings in the Paper Menu.

• Verify the correct print media is being used.

• If you are printing on an uneven print surface, change the Paper Weight and Paper Texture

settings in the Paper Menu.

• Verify the print media is within the printer specifications. See the User's Guide for more

details.

If the problem continues, turn the printer off and contact the place you bought your printer.

Toner is on the transfer roll. To help prevent this, do not load print media that is smaller than

the page size of the job to be printed.

Open and close the printer top front cover to run the printer setup cycle and clean the transfer

roll.

• Check the print cartridge to make sure it is installed correctly.

• Replace the print cartridge.

• Make sure the packaging material is removed from the print cartridge.

• Check the print cartridge to be sure it is installed correctly.

• The toner may be low. To utilize the remaining toner, remove the cartridge by gripping the

handles with both hands. With the cartridge arrows pointing downward, shake the print

cartridge back and forth. Reinstall the cartridge, and then press

Print quality and troubleshooting

Page 2 of 5