Gardena 4068 사용 설명서 - 페이지 8

{카테고리_이름} Gardena 4068에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena 4068 14 페이지. Electric aerator
Gardena 4068에 대해서도 마찬가지입니다: 운영자 매뉴얼 (9 페이지), 사용 설명서 (15 페이지), 운영자 매뉴얼 (9 페이지), 사용 설명서 (14 페이지), 사용 설명서 (13 페이지), 사용 설명서 (13 페이지), 사용 설명서 (15 페이지), 운영자 매뉴얼 (10 페이지)

페이지 인쇄
Gardena 4068 사용 설명서

7. Trouble-Shooting

Replacing aerator cylinder :
E
2
F
1
K
F
I J
Problem
Abnormal noise.
Clattering in the unit
Whistling sound
18
DANGER ! The aerator cylinder can cause injuries !
A
V Prior to rectifying faults, unplug from the mains
and wait until the aerator cylinder has stopped.
V Wear working gloves when rectifying faults.
If the aerator cylinder is in wear adjustment position 3 and is worn,
the aerator cylinder must be replaced.
Only use the original GARDENA cylinder for art. 4068 which can
be ordered via GARDENA-Service.
1. Unscrew two screws
2. Lift aerator cylinder
shaft 2.
3. Remove bearing shell
G
4. Push new spring
the new aerator roller
F
F
5. Push new aerator cylinder
way that the torsion spring
J
shaft
.
6. Push bearing shell
7. Screw bearing shell
out tightening too much.
8. Set wear compensation to aerator position 1
(see 6. Maintenance "Adjusting for wear" ).
Possible Cause
Foreign bodies on the aerator
cylinder are hitting the Aerator.
Foreign bodies blocking
the aerator cylinder.
E
on the underside of the housing.
F
at an angle 1 and pull away the drive
K
from the aerator cylinder
H
, new stop
and new torsion spring
F
.
G
H
G
H
F
on to the drive shaft in such a
I
is inserted in the gap in the drive
K
on to the aerator roller
K
to the underside of the housing
Remedy
1. Switch off the Aerator,
remove the mains plug from
the socket and wait until the
Aerator has stopped rotating.
2. Remove foreign bodies.
3. Check aerator immediately.
immediately.
F
.
I
into
I
twisted
I
new
F
.
E
, with-